sas2208configuration

TurnToJPG -->


Configuration Steps

Select the SAS Controller:

/images/2017_12_26_11_46_56_643x143.jpg

Ignore the foreign configration, hit cancel:

/images/2017_12_26_11_48_36_630x157.jpg

Display all of the disks:

/images/2017_12_26_11_49_30_636x411.jpg

Select one disk(1T-Disk):

/images/2017_12_26_11_51_50_630x436.jpg

Click configuration wizard:

/images/2017_12_26_11_55_26_634x372.jpg

Select Configuration Method:

/images/2017_12_26_11_56_26_633x290.jpg

Configure a new disk:

/images/2017_12_26_11_59_41_629x344.jpg

Click “Accept DG” for accepting the configurations.

/images/2017_12_26_12_00_42_633x354.jpg

Ignore add Span:

/images/2017_12_26_12_02_42_638x362.jpg

Add to Span:

/images/2017_12_26_12_04_03_633x341.jpg

/images/2017_12_26_12_05_45_635x418.jpg

/images/2017_12_26_12_06_39_634x435.jpg

Now you add successfully.

Click Accept:

/images/2017_12_26_12_07_17_627x317.jpg

Click Save Configuration, and you will be asked to initialize the new virtual driver, click yes.

/images/2017_12_26_12_08_48_567x190.jpg

Then save and reboot your system, your configuration will be done.

System

Install a new system under /dev/sde, then you could use following command for setting the grub configuration:

# os-prober
# grub2-mkconfig -o /boot/grub2/grub.cfg

Then you could get your newly installed system working.